BI-FOLDING GATES

Speed folding gates crash

Bi-folding gate with width from 3 to 9 meter. The standard height is 1.5 or 2.5 meters, height from 1.5 to 4 meters. Automatic bi-folding gate is driven by the FAAC 391 or ELKA ZENIT-S 452 motor. The gate control unit is FAAC 024S / E124 with a microprocessor. The standard equipment of the gate is a full set of safety bars that eliminate the risk of crushing.

This gate allows to cover entries from 3m wide to 9m. For special bespoke projects we did even 20m wide bi-folding gates.

Construction is based on two separate supporting posts, each with automatic gate leaf. Gate leaf is supported by post only and doesn’t need any ground rail or guiding system.

Each gate leaf can be programmed to work independently and cover two-line entries. The drives are located on the posts and are controlled by a Programmable Logic Controller (PLC) located within the associated control cabinet. Gates are equipped with safety features like safety edges, photocells line and warning light.

Opening / closing speed 12-20 seconds – fully programmable for slower speeds.

Gates uses ROGER BRUSHLESS drives providing highest quality of performance. B&K standard includes Hot Dip Galvanized surface coating for all our products. Second layer of powder coating in RAL colours are also available by additional surcharge.

Gates are designed for continuously working cycle, 100% high duty

Standard infill is made of 25x25mm vertical profiles, 80x20mm and 100x80mm horizontal profiles, shutter or solid metal sheet. On clints demand custom designed can be used to suit almost any request.

TECHNICAL INFORMATION

Gallery