SLIDER XL

Full automatic cantilever sliding gate. Steel construction is galvanized and could be paint in any RAL color in our factory. Different infill options and equipment. Width of gate from 9 to 12 meters, height form 1 to 3 meters. Gate is equipped in safety edges.

slider-xl-slider-gates-realization

FEATURES & BENEFITS


Features

  • ♦ Automatic
  • ♦ Manually opening during power failure
  • ♦ Drive profile 80x80x5 mm

Benefits

  • ♦ Solid steel construction
  • ♦ Easy to install
  • ♦ Galvanization + RAL

TECHNICAL INFORMATION

Height From 1.0 to 3.0 meter (standard is 2.0 to 2.4m)
Width Above 9 meter to 12 meter
Electrical engine
FAAC
Electrical unit FAAC Microprocessor
Emergency Operation during Power Failure Manually operated after disengagement of motor by clutch
Operating temperature -40*C to +60*C (optional 70*C)
Main power
230VAC 50Hz / 3*400 VAC 50Hz
Drive profile
Welser profile 190×155 mm
Infills options
  • ♦ 868 weldmesh
    ♦ 22mm round steel tube
    ♦ P5 weldmesh
    ♦ 25x25mm steel profile
    ♦ 30x10mm steel profile
    ♦ 358 weldmesh/securifor
    ♦ Solid metal sheet infill
    ♦ 30×30 mesh infill
    ♦ Perforated metal sheet infill
    ♦ Trapezoidal metal sheet infill

EQUIPMENT


Basic

  • ♦ Keys for OPEN-STOP-CLOSE
    ♦ Emergency stop button
    ♦ Integrated photocells
    ♦ Full safety Edge Sytem
    ♦ Rotating warning light

Optional

  • ♦ Integrated traffic LED RED/GREEN light
    ♦ Other infill’s (standard infill is 25×25 profil
    ♦ Anti Climbing Shark tooth’s on top of the frame
    ♦ Post’s on top for concertina or barbed wire
    ♦ Radio control transmitter
    ♦ Induction loops
    ♦ Pushbutton operator panel
    ♦ Code keypad
    ♦ Code cards, Code-card reader
    ♦ Intercom systems
    ♦ GSM-unit


Gate steering options

  • ♦ Pushbutton desktop panel ALUMINIUM
    ♦ Remote controller 2 or 4 channel
    ♦ Pushbutton desktop panel PCV
    ♦ Key switch operations
    ♦ Automatic Number Plates Recognition
    ♦ Steering Ground Loop Detection
    ♦ Keypad
    ♦ Proximity Card Reader

GALLERY

OTHER PRODUCTS

CONSULT WITH EXPERT


If you need sliding gate, just contact our technic expert.


Infill options

The gate can be filled with a welded mesh, panel, tubular or square or rectangular steel profile, full, welded, or perforated sheet, welded mesh with narrow mesh 30×30 mm.



Automatic

Depending on the equipment, gate can be opened automatically by means of a signal from induction loops, recognition of number plates, numeric keypad or through a proximity card reader.



Safe in use

The gates are secured against the risk of jamming / damage, are equipped with safety strips and two lines of photocells. They meet safety standards in accordance with EN 12453, Directive 2006/46 / EC, are marked with the CE mark.


raptor-swing-gate

High security bi-folding speed gate

High security bi-folding gates are design to protect enter and are installed in location where is no place for swing gate. It is a combination of high security gate which is desing to stop enemy and swing gates.   it is best solution to install…

Protecting and deliver security systems worldwide

We develop constantly in response to the needs of a changing world. In our range of products you will find road blockers, heavy secuirty gates, arm barrriers and other security systems to secure areas need to be protected. We deliver security systems worldwide, most of…

CONTACT

b&k logo

B&K Security
ul. Przymiejska 15
63-400 Ostrów Wielkopolski
POLAND

Account number:
PL 28114020040000341205400330
SWIFT: BREXPLPWMBK

+48 530 857 007

INTERESTED IN OUR PRODUCTS?
CONTACT US!

b&k logo
B&K Security
ul. Przymiejska 15
63-400 Ostrów Wielkopolski
POLAND

Account number:
PL 28114020040000341205400330
SWIFT: BREXPLPWMBK

+48 530 857 007